Date:    01/15/1996
Product: 5511/5512/5513
Subject: IDE Driver Change Notice

The IDE driver has been changed from 551X113.ZIP to 551X114.zip.
    THREE parts has been changed :
          (1) SiS IDE DOS Driver modified.
          (2) SiS IDE Windows driver modified.
          (3) SiS IDE Windows 95 driver modified.

===============================================================================
5513IDE PROBLEM LOG:

1.      SiS IDE DOS DMA mode + AMIDIAG.EXE + Conner850A system will reset
        after AMIDIAG executed.
Sol:    Version 1.14 fixed.

2.      SiS IDE Windows driver + Conner CFS1275A, Winstone 95 failed.
Sol:    Version 1.14 fixed.

3.      Unexpected " siside.mpd not found" message appeared during SiS IDE
        Windows 95 Driver installed process.
sol:    Vesionr 1.14 fixed.

4.      SiS IDE Windows 95 Driver "update version" conflicts problem.
Sol:    Version 1.14 fixed.

5.      How to play Video CD & CD-i movies with SiS IDE Windows 95 Driver in
        Windows 95 ?

Sol:    (0) Connect your Hard Disk to IDE Primary Channel.
            Connect your  CD-ROM to IDE Secondary Channel.

        (1) Refer your CD-ROM User Guide to install your CD-ROM's Dos Driver.
            (Please make sure that Config.sys file has your CD-ROM's Dos Driver,
            Autoexec.bat file has MSCDEX.EXE installed and both of them aren't
            be remarked by Windows 95 Installation)

        (2) Enter Windows 95 System.

        (3) Double click the "My Computer" icon on the Desktop.

        (4) Double click the "Control Panel" icon in "My Computer".

        (5) Double click the "System" icon in "Control Panel".

        (6) Select "Device Manager" option in "System Properties".

        (7) Double click "Hard Disk Controllers"

        (8) Select the "Secondary SiS IDE Controller".

        (9) Click on the "Properties" option.

       (10) On the "General" label card. In the "Device Usage" column,
            unselect the "Original Configuration" box.

       (11) Select "Yes" when prompted to restart Windows 95 in "System
            Setting Change".

       (12) After above settings finished, you can play CD-Multimedia functions
            with multimedia playback software. Multimedia playback software
            (mediaplayer, xing ......etc) are necessary, users can't playback
            those CD-Multimedia by only clicking the CD-ROM icon directly.
